Welch Allyn KleenSpec 790 Serie Instrucciones De Uso página 9

All manuals and user guides at all-guides.com
Directions for use
Charging the illuminator
Charge the illuminator before using it the first time, or whenever
its low-charge indicator turns on.
LED
Power switch
Low-charge indicator:
To charge the illuminator
1. If LED is lit, turn power switch off.
2. Connect charging base to AC power.
3. Place the illuminator (either direction) into the charging
station. Full charging takes 6 to 8 hours.
4. Remove the charged illuminator when you are ready to use it.
It is safe to leave the illuminator in the charging station after it
is charged.
Cordless illumination system
On = battery low
Status indicator:
Off = no AC power
Green = AC power
Amber (illuminator inserted) = charging.
Full charging takes 6 to 8 hours.
7