Listening To The Fm Radio; Tuning In A Station; Presetting Stations; Tune To A Preset Radio Station - Vieta Home VH-SB400BK Manual Del Usuario

Note:
The lower the level, the stricter the limitation.

If the rating of the loaded DVD disc is higher

than the level you set, the system will require a
password. Enter your password and press the
ENTER button to start playback.
1 Select the desired parental control level from the
menu, then press Enter button.
2 You will be prompted to enter your password.
Use the 0-9 buttons to enter 000000(or your
privacy password if already established).
No need to enter a password if "Password Mode"

is set to OFF.
Password
Password Mode
You can temporarily unlock discs for playback ac-
cording to the level.
To change this setting, select On or Off, enter
your password, and press the ENTER button.
On
You need a password to change the level of
parental control.
Off
You can change the level of parental control
without a password. You cannot temporarily
unlock discs for playback.
Password
You can set a new password for parental control.
The default password is 000000.
1 Select "Change" and press the ENTER button.
2 Enter 000000 (or your privacy password) using
the 0-9 buttons.
3 Enter a new password.
4 Enter the same password again to confirm.
5 Press Enter button.
Note:
you will need your password to change the level
of control in the future as well as to temporarily
unlock discs for playback.
If you forget your password, use 000000.
Default
All the items in the Setup menu (except for the pass-
word and parental control) will be reset to the default
settings.
34
All manuals and user guides at all-guides.com

Listening to the FM Radio

Tuning in a Station

1 Ensure that you have connected and fully extended
the FM antenna.
2 Press the TUNER button to select the TUNER
source.
3 Press and hold the buttons, the
H/G
frequency changes down or up automatically
until a station is found. Or press and hold
buttons repeatedly until you find the station
G
you want.
Note:
- Press and hold button on the remote control
BF
to change grid.
- The unit will automatically switch the Stereo or
MONO channel to receive the FM radio mode, it
can get the best effect.

Presetting Stations

You can preset up to 20 FM stations.
Program radio stations automatically

Press and hold the PROG button for 2 seconds
to activate automatic programming. All available
stations are programmed in the order of
waveband reception strength.
- The first programed radio station is played
automatically.
Program radio stations manually

1 Tune in the desired station, then press the PROG
button.
2 Press the 0~9, or
 
preset number.
3 Press the PROG button to store the station.
4 Repeat above steps 1 to 3 for each station you
want to store in memory with a preset number.
Press and hold the L button to erase the memory
5
radio stations.
Note:
If the system is unplugged or if a power failure
occurs, the preset stations will not be erased.

Tune to a Preset Radio Station

Press the or buttons to select a preset
 

number that you want.
Note:
You can also use the numerical keypad to select
a preset station directly.
Barra de sonido multimedia
H/
buttons to select the