Copy Channel Data; Common Interface; Embedded Viaccess - Samsung DSB-A200C Instrucciones De Uso

2/27/04 3:22 PM Page 30
OPERATING THE RECEIVER
m Information
contact your service provider or a service center
k for information available from this menu.
sor on this sub menu and press the OK key.
will be the on-screen display.
u forgot PIN Code, press '0' key four times.
, current PIN Code is displayed.
p in mind that your children or other people can
his PIN Code using this method.
are Upgrade
nload and upgrade the software of this STB
RA and Hotbird or Sirius satellite when the new
leased.
e satellites for upgrading software on Samsung
d can be changed in the future.
oading don't turn off the STB.
ew version of software to download, you are
will update or not.
OK key, the update starts right away.
te is impossible, you get this message "You can't update software!"
u don't need to update, "You don't need to update software!" will be displayed.
rmation that a Transponder is changed to different one for Samsung software,
elect 'User Advanced Mode' at Menu mode by using the
ould set exact parameters for the new transponder for Samsung.
Channel Data
o copy the channel data from one receiver
ease follow the instruction below.
your own channel data, such as favorite
el with your own master box.
ur master box when you install another box.
oth master & slave receivers
x(Installed Box) : Stand-by Mode
Installing Box) : Menu Mode
Boxes with RS232 serial cable
should have male connector with crossed signals)
'System Setup' and press the OK key.
'Copy Channel Data' with the / keys.
' to start channel data copy
this function after removing SMART CARD or CAM modules.
GB-30
All manuals and user guides at all-guides.com
/ key.
D I G I T A L S A T E L

5. Common Interface

(DSB-A200C, DSB-A300W)
This STB is equipped with two PCMCIA slots, which enable
the use of two CI-CAMS.
When a Common Interface CAM is inserted inside the PCMCIA
slot, the system detects the type of the CAM automatically and
display in the main menu.
On choosing this menu, you will be able to access the different
options available with the type of the CAM like authorizations,
pre-booking, package details etc.,
N N o o t t e e : The menu differs according to each inserted CAM.
If the module has not been installed yet, the phase
"Not Installed" will be accordingly indicated.
During inserting any CAM, you may have distorted video or audio.
It doesn't mean STB is wrong.

6. Embedded Viaccess

1. Change PIN code:
Change the PIN code of the Smartcard,
if necessary.
2. Change Parental Rating:
Change the setting for the family filter,
if necessary.
N N o o t t e e : This service is not offered by all channels.
3. Change Lock indicator:
You can change the lock status of the
Viaccess Smartcard.
4. Issuer Information:
Here you can call up all information stored on
the Smartcard by the publisher.
5. Authorization:
This option would indicate the authorization status
of the Smartcard.
L I T E R E C E I V E R
OPERATING THE RECEIVER
(DSB-A300V, DSB-A300W)
GB-31