Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
4
3
2
1
10
6
UNFOLDING AND FOLDING
• WARNING
: Child should not be near to the stroller
when folding or unfolding!
• Ensure the brake is on while folding and unfolding the
chassis.
8. Unfold chassis
Push the frame lock inwards to unlock the handlebar, and
pull the handlebar upwards.
Place your foot on the brake bar and continue to pull the
handlebar upwards and towards yourself until it clicks.
8
9. Fold chassis (with seat attached)
• kobi can be folded with the seat attached (i.e. in its
upright position and forward facing)
• kobi can neither be folded with the carrycot attached
nor with the second seat attached.
• Remove the changing bag from the basket when
folding with seat attached.
Make sure the rear seat fixings on the chassis are in
position 1.
Push down the safety button and pull the two folding
locks upwards. Then lower the handlebar until it clicks
9
onto the frame lock.
10. Fold chassis for standing
• kobi can stand up on its own for easy storage.
Before folding rotate the handlebar into position 4 (see
fig.
11).
HANDLEBAR HEIGHT
11. Adjust handlebar height
Press and hold both buttons located on the outside of
the handlebar and rotate the handlebar into the desired
position.
11
PARKING BRAKE
• WARNING
: Always use the brake even when
standing still for only a few moments!
12. Apply and release parking brake
Press down the brake pedal to park.
Press it down again to release.
12
2
3
1
13
14
15
16
17
2
1
18
PHASE 1: BABY
CARRYCOT
• When using kobi for children under the age of 6
months, we recommend using the supplied carrycot
until the child can sit unaided.
• Attach the carrycot to the upper part of the chassis, not
to the lower part.
13. Set up carrycot
Zip open the seat and take out the carrycot.
Push the bottom of the carrycot up (1) and then push the
two flaps underneath the carrycot tube (2).
Push down the bottom of the carrycot again so it clicks
into a flat position (3). Place the mattress inside the
carrycot and attach the safety bar (see
fig
32).
14. Adjust carrycot angle
It is easier to fit the carrycot onto the chassis if the
attachment brackets are in position III, pointing straight
downwards. To achieve this pull the angle adjustment
lever and rotate the brackets by hand. The carrycot angle
can also be adjusted when fitted to the chassis.
15. Attach carrycot
Position the carrycot so that the angle adjustment lever
is at the front end of the stroller. Lower the carrycot onto
the chassis until it clicks in place.
16. Remove carrycot
Press the two buttons on both sides of the carrycot and
lift it up.
17. Adjust height of carrycot
• There are two height positions for the carrycot.
Press the height adjustment buttons on both sides of the
chassis and move the carrycot up or down.
18. Collapse carrycot
Remove the mattress and the safety bar.
Push the bottom of the carrycot up (1) and then release
the sideflaps from the carrycot frame (2). Open the seat
and position the collapsed carrycot inside the seat. Align
the angle adjustment lever with the hole in the rear shell
of the seat.
Make sure the seat brackets stay out of the seat.
ENG
7
Publicidad
Capítulos
Tabla de contenido
