Descargar Imprimir esta página

Freestyle PRECISION 2.0 Manual Del Usuario

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 2

Enlaces rápidos

®
PRECISION 2.0
4. Press S3 button, the minute digits
5. Press S1 button to set the minute
2
1
6. Press S3 button, the hour digits will
7. Press S1 button to set the hour
S4
S1
A B
8. Follow the same pattern to set the
9. To set the hour format, press S1
S3
S2
3
10. To set the calendar format, press
1- Hour Hand
2- Minute Hand
3- Second Hand
11. When finished making all the set-
S1 – Start/stop Button
S2 – Lap/reset Button
NOTE: The chosen hour format and
S3 – Mode Button
calendar format will apply to both
S4 – Light Button
HOME TIME mode and FOREIGN TIME
mode.
SPECIAL FEATURE:
This Freestyle product features unique
NOTE: In FOREIGN TIME settings, only
Hydro Pushers®: these pushers can be
minutes, hours, date, month and day
pressed under water to a dynamic water
(of the week) are open to setting.
pressure (not water depth) of 3 ATM.
TO SET THE ALARM TIME:
TO SET THE ANALOG TIME:
1. Press S3 button to select HOME
1. Pull crown out to first click position
B.
2. Turn crown to set time.
2. Press and hold S2 button for ap-
3. Push crown back to position A.
DISPLAY MODES:
The watch has four display modes:
3. Press S1 button to set the minute
HOME TIME (TIME) / FOREIGN TIME
(TM-2), HOME TIME ALARM (ALM1) /
FOREIGN TIME ALARM (ALM2), STOP-
4. Press S3 button, the hour digits will
WATCH (STW) and TIMER (TMR).
5. Press S1 button to set the hour
To change from one display mode to
another, press S3 button once. The
mode description will appear for
6. When finished making all the set-
approximately 2 seconds before the
selected mode is activated.
PROMPTING ARROWS:
TO TURN ON/OFF THE ALARM AND
The S1, S2 and S3 buttons each has a
HOULY CHIME:
prompting arrow. Their corresponding
1. Press S3 button to select HOME
arrow will appear whenever the button
is required to be pressed while setting
the times, calendar and alarms.
2. Press S1 button once to activate
HOME AND FOREIGN DISPLAY:
To display FOREIGN TIME, press S2
3. Press again to activate the hourly
button when HOME TIME is displayed.
The mode description (TM-2) will
appear shortly before FOREIGN TIME
4. Press the third time to activate both
is displayed. To change back to HOME
TIME, press S2 button.
5. Press the fourth time to deactivate
To display the daily FOREIGN TIME
ALARM, press S2 button when HOME
TIME ALARM is displayed. The mode
description (ALM2) will appear shortly
WHEN AN ALARM OR CHIME GOES
before FOREIGN TIME ALARM is dis-
OFF:
played. To change back to HOME TIME
A tune will be emitted by the hour when
ALARM, press S2 button.
the hourly chime function is activated.
TO SET THE DIGITAL TIME AND
An 20-second alarm tune will be emit-
CALENDAR:
ted at the designated time when the
1. Press S3 button to select HOME
alarm is activated. To stop the tune,
TIME or FOREIGN TIME mode to
press any button.
set.
2. Press and hold S2 button for
TO USE THE STOPWATCH:
approximately 2 seconds, the mes-
1. Press S3 button to select STOP-
sage "SET" will be displayed and
the second digits will blink.
2. The stopwatch will then be displayed
3. Press S1 button to reset second
digits to zero.
All manuals and user guides at all-guides.com
ning, or reset.
will blink.
3. To resume a counting, press S1 but-
ton to resume from where it left off.
digits. Holding down the button will
4. To start a new counting, reset the
speed up the process.
stopwatch to zero first.
Press S1 button to stop counting,
blink.
then press S2 button to reset coun-
ter to zero.
digits. Holding down the button will
speed up the process.
For the measurement of elapsed time,
In STOPWATCH mode,
date, month, day (of the week), hour
1. Press S1 button to start counting.
format and calendar format.
2. To stop counting, press S1 button.
Press S1 button again to resume
button to toggle between 12-hour
from where it left off.
and 24-hour formats. The P.M.
3. To reset to zero, press S1 button
indicator will be displayed to
to stop counting and then press S2
indicate the time period 12:00 P.M.
button.
– 11:59P.M. in 12-hour format.
For the measurement of split time,
S1 button to toggle between M-D
In STOPWATCH mode,
(month-date) and D-M (date-month)
1. Press S1 button to start counting.
formats.
2. While the stopwatch is running,
press S2 button to register a lap.
tings, press S2 button to confirm.
The stopwatch is still running in the
background.
To display the current elapsed time,
press S2 button again.
3. Repeat the last step until all the laps
have been registered.
4. To reset to zero, press S1 button to
stop counting and then press S2
button.
NOTE: The stopwatch will count up to
59 minutes and 59.99 seconds before
starting from zero again.
TIME ALARM or FOREIGN TIME
ALARM to set.
NOTE: You can leave the stopwatch
running while switching over to other
proximately 2 seconds, the message
operating modes.
"SET" will be displayed and the
minute digits will blink.
TO SET THE TIMER:
1. Press S3 button to select TIMER
digits. Holding down the button will
mode.
speed up the process.
2. Press S2 button to alter the timer
setting among 1, 3, 5, 10, 15, 20, 25,
blink.
30, 45 and 60 minutes.
digits. Holding down the button will
TO USE THE TIMER:
speed up the process.
1. Press S3 button to select TIMER
mode.
tings, press S2 button to confirm the
2. The timer will then be displayed in
settings.
its current state – stopped, running,
or reset.
3. To resume a stopped counting, press
S1 button to resume from where
it left off.
TIME ALAM or FOREIGN TIME
4. To start a new counting, reload the
ALARM to set.
timer first.
Press S1 button to stop counting,
the daily alarm. Alarm indicator
then press S3 button to reload the
will appear.
timer.
5. When reaching zero in a countdown,
chime. Chime indicator
will ap-
a tune will be emitted. To stop the
pear.
tune, press any button. The timer
will reload automatically.
functions. Both indicators will ap-
pear.
NOTE: You can leave the timer running
while switching over to other operating
both functions. Both indicators will
modes.
disappear.
TO USE THE BACKLIGHT:
Press S4 button to turn on the back-
light for approximately 3 seconds.
WATCH mode.
in its current state – stopped, run-
ENGLISH
To reduce carbon foot print, these
Freestyle instructions are printed with
soy inks on recycled paper.

Publicidad

loading

Resumen de contenidos para Freestyle PRECISION 2.0

  • Página 1 SPECIAL FEATURE: 4. To reset to zero, press S1 button to This Freestyle product features unique NOTE: In FOREIGN TIME settings, only stop counting and then press S2 Hydro Pushers®: these pushers can be minutes, hours, date, month and day button.
  • Página 2 CARACTERÍSTICA ESPECIAL: NOTA: El formato elegido para la hora y el para volver a cero. Este producto de Freestyle tiene una calendario se usará tanto para el modo de característica única, Hydro Pushers®: hora en casa como para el del extranjero.
  • Página 3 Runden registriert wurden. BESONDERHEITEN: HINWEIS: Im FREMDZEIT-Modus können 4. Um die Stoppuhr auf Null zurück- Dieses Freestyle-Produkt ist mit einzigar- nur Minuten, Stunden, Datum, Monat und zusetzen, drücken Sie zum Abbruch tigen Hydro-Pusher® ausgestattet: Diese der Zeitmessung Taste S1 und dann Wochentag eingestellt werden.
  • Página 4 S2. FONCTION SPECIALE: res, la date, le mois et le jour (de la semaine) Ce produit Freestyle unique offre la fonction peuvent être réglés. REMARQUE: Le chronomètre compte jusqu’à unique Hydro Pushers®: ces boutons peuvent 59 minutes et 59,99 secondes avant de recom- être pressés sous l’eau à...
  • Página 5 S2. FUNZIONE SPECIALE: ESTERA. 3. Ripetere quest’ultimo passaggio fino a Questo prodotto Freestyle garantisce la che sono stati registrati tutti i giri. caratteristica unica Hydro Pushers®: questi NOTA: Nelle impostazioni ORA ESTERA, 4. Per resettare a zero, premere il tasto pulsanti possono essere premuti sott’acqua...
  • Página 6 CARACTERÍSTICAS ESPECIAIS: internacional, apenas os minutos, horas, NOTA: O cronómetro faz uma contagem Este produto Freestyle apresenta os únicos data, mês e dia (da semana) podem ser até 59 minutos e 59.99 segundos antes de Hydro Pushers®: estes botões de accio- alteradas.
  • Página 7 ® 日本語 All manuals and user guides at all-guides.com 5. S1ボタンを押して分刻を設定します。 ります。 PRECISION 2.0 ボタンを長押しすると早く進みます。 2. 測定をストッ プするにはS1ボタンを押 6. S3ボタンを押すと、 時桁が点滅し します。 もう一度S1を押すと、 ストッ プ ます。 した時点から再び測定が始まります。 7. S1ボタンを押して時刻を設定します。 3. ゼロにリセットするには、 S1を押して ボタンを長押しすると早く進みます。 測定をストッ プしてからS2を押します。 8. 同じ作業を、 日付 ・ 曜日 ・ 時間フォーマ...