Cleaning And Maintenance; Cleaning The Waste Water Tank - Silvercrest SHBR 560 A1 Instrucciones De Uso

Cleaning and maintenance

RISK OF ELECTRICAL SHOCK!
► Switch the appliance off and pull out the mains plug before cleaning the
appliance!
ATTENTION! PROPERTY DAMAGE
► Do not use caustic, abrasive or solvent-based cleaning materials. These can
damage the surfaces of the appliance.
NOTE
► Empty the waste water tank
► After every use, carry out a self-cleaning of the appliance (see section
Self-cleaning function).
Clean the appliance with a moist cloth or rag. For stubborn soiling use a mild
detergent on the cloth.

Cleaning the waste water tank

NOTE
► Empty the waste water tank
MAX marking.
► Once the waste water tank
to switch off automatically.
Proceed as follows to empty the waste water tank
1. Press the knob at the top of the waste water tank
Hold the handle of the waste water tank
wards.
2. Pull the waste water tank
Pull the lid of the waste water tank
(see fig. 21).
■ 92 │ GB │ MT
2
after every use.
2
as soon as the dirty water has reached the
2
is full, the float
2
2
while pressing the knob down-
2
forwards out of the appliance (see fig. 20).
9
upwards out of the waste water tank
8
causes the suction motor
:
2
downwards (see fig. 20).
SHBR 560 A1
2