Optional Accessories - Makita DHP470 Manual De Instrucciones

exert care when the bit begins to break through the
workpiece.
• A stuck bit can be removed simply by setting the
reversing switch to reverse rotation in order to back
out. However, the tool may back out abruptly if you do
not hold it firmly.
• Always secure small workpieces in a vise or with a
similar hold-down device.
• If the tool is operated continuously until the battery
cartridge has discharged, allow the tool to rest for
15 minutes before proceeding with a fresh battery.
Drilling in wood
When drilling in wood, the best results are obtained with
wood drills equipped with a guide screw. The guide screw
makes drilling easier by pulling the bit into the workpiece.
Drilling in metal
To prevent the bit from slipping when starting to make a
hole, make an indentation with a center-punch and
hammer at the point to be drilled. Place the point of the bit
in the indentation and start drilling.
Use a cutting lubricant when drilling metals. The
exceptions are iron and brass which should be drilled dry.
MAINTENANCE
CAUTION:
• Always be sure that the tool is switched off and the
battery cartridge is removed before attempting to
perform inspection or maintenance.
• Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers, always
using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:
• These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use the
accessories or attachments for their stated purposes.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Drill bits
• Tungsten-carbide tipped hammer bit
• Phillips bit
• Slotted bit
• Socket bit
• Blow-out bulb
• Makita genuine battery and charger
• Hook
• Bit holder
NOTE:
• Some items in the list may be included in the tool
package as standard accessories. They may differ
from country to country.
8
All manuals and user guides at all-guides.com
Noise
The typical A-weighted noise level determined according
to EN60745:
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
• The declared vibration emission value has been
• The declared vibration emission value may also be
• The vibration emission during actual use of the power
• Be sure to identify safety measures to protect the
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Cordless Hammer Driver Drill
Model No./Type: DHP470, DHP480
are of series production and
Conforms to the following European Directives:
And are manufactured in accordance with the following
standards or standardised documents:
Sound pressure level (L
pA
Sound power level (L ): 93 dB (A)
WA
Uncertainty (K): 3 dB (A)
Wear ear protection.
Model DHP470
Work mode: impact drilling into concrete
Vibration emission (a ): 8.0 m/s
h,ID
2
Uncertainty (K): 1.5 m/s
Work mode: drilling into metal
Vibration emission (a ): 2.5 m/s
h,D
2
Uncertainty (K): 1.5 m/s
Model DHP480
Work mode: impact drilling into concrete
Vibration emission (a ): 7.0 m/s
h,ID
2
Uncertainty (K): 1.5 m/s
Work mode: drilling into metal
Vibration emission (a ): 2.5 m/s
h,D
2
Uncertainty (K): 1.5 m/s
measured in accordance with the standard test method
and may be used for comparing one tool with another.
used in a preliminary assessment of exposure.
WARNING:
tool can differ from the declared emission value
depending on the ways in which the tool is used.
operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts
of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to
the trigger time).
2006/42/EC
EN60745
ENG905-1
): 82 dB (A)
ENG900-1
2
2
or less
2
2
or less
ENG901-1
ENH101-16