Setting Up The External Sensor; Inserting The Batteries; Setting Up The Weather Station - Auriol Z29962A Manual De Instrucciones

of time pulses transmitted from one of the highest
precision clocks in the world close to Frankfurt / Main
in Germany - it varies by 1 second in 1 million years.
In ideal conditions, your weather station can pick
up this signal over a distance of up to approx.
1,500 km around Frankfurt / Main.
©

Setting up the external sensor

Inserting the batteries:

Remove the battery compartment cover from
the back of the external sensor.
Insert two 1.5 V
the battery compartment
Note: make sure that the polarity is correct.
This is indicated inside the battery compartment
27
– The external sensor is now ready for operation
and the indicator LED
Close the battery compartment cover.
©

Setting up the weather station

Inserting the batteries:
Open the battery compartment cover on the
back of the weather station.
Place two 1.5 V
the battery compartment
Note: take care that the polarity is correct. This
is indicated inside the battery compartment
(see Fig. C).
Close the battery compartment cover.
As soon as the batteries have been inserted, the LCD
indicates the indoor temperature
. The weather station starts to receive the signal
3
82 GB/MT
64089_aur_Wetterstation_Content_LB5.indd 82
batteries (AA) (included) in
(see Fig. D).
25
batteries (AA) (included) in
.
27
will flash.
.
21
21
and the humidity
5
03.03.11 11:07