Siemens RVL482 Instrucciones De Montaje página 45

Settings on the "Heating engineer" level
Press
lecting the plant type and the plant-related variables.
Selecting the plant type on operating line 51:
The required plant type must be selected on operating line 51 using buttons
activates all functions required for the respective type of plant and shows the associated operat-
ing lines.
A plant type is comprised of a space heating circuit (5 different types) and a d.h.w. circuit (4
different types). The 2 types of circuits can be combined in 21 different ways. The following plant
diagrams show all possible combinations.
The controller's operating line 51 only accepts combinations that are possible.
Example of a setting:
51
Plant types
A6
B1
B2
B3
B31 D.h.w. storage tank temperature sensor / thermostat 1
B32 D.h.w. storage tank temperature sensor / thermostat 2
B5
B6
B7
B9
E1
E2
LPB Data bus
Building Technologies
For latest prices and delivery to your door visit MyTub Ltd - www.mytub.co.uk - info@mytub.co.uk 0844 556 1818
and simultaneously for 3 seconds to activate the "Heating engineer" level for se-
Plant type
(1−0 ... 5−4)
Room unit
Flow temperature sensor
Boiler temperature sensor
Flow temperature sensor for d.h.w.
Room temperature sensor
Collector sensor
Return temperature sensor
Outside sensor
Heat source (boiler)
Consumer (space)
74 319 0619 0 a
1 = Space heating type 1
2 = d.h.w. circuit type 2
2−1 Type numbers in the following
section
.........................
K6 Electric immersion heater
M1 Circulating pump / bypass pump
M2 Heating circuit pump
M3 Charging pump
M4 Boiler pump or circulating pump
M5 Collector pump
N1 Controller RVL482
U1 Solar sensor
U2 Wind sensor
Y1 Heating circuit mixing valve
Y7 D.h.w. mixing valve or mixing valve for minimum
limitation of the boiler return temperature
17.04.2008
en
and This
45/288