Replacing The Light Bulbs; Freezer Compartment - Fagor FQ8925X Manual De Instrucciones

Replacing the light bulbs.

Setting the controls to 0 (off) does not remove power to the light circuit.
Your light shield will look like one
of the following:
All manuals and user guides at all-guides.com
Refrigerator Compartment—Upper Light
1. Unplug the refrigerator.
2. The bulbs are located at the top of the compart-
ment, inside the light shield. On some models, a
screw at the front of the light shield will have to
be removed. On other models, the screw is lo-
cated in the pocket located at the back of the
light shield.
3. To remove the light shield, on some models,
press in on the tabs on the sides of the shield
and slide forward and out. On other models, just
slide the shield forward and out.

Freezer Compartment

1. Unplug the refrigerator.
2. Remove the shelf just above the light shield.
(The shelf will be easier to remove if it is emptied
first.) On some models, a screw at the top of the
light shield will need to be removed.
3. To remove the light shield, press in on the sides,
and lift up and out.
Dispenser
1. Unplug the refrigerator.
2. The bulb is located on the dispenser under the
control panel. Remove the light bulb by turning it
counterclockwise.
3. Replace the bulb with a bulb of the same size
and wattage.
4. Plug the refrigerator back in.
4. After replacing the bulb with an appliance bulb of
the same or lower wattage, replace the light
shield and screws (on some models). When re-
placing the light shield, make sure that the tabs
at the back of the shield fit into the slots at the
back of the light shield housing.
5. Plug the refrigerator back in.
4. Replace the bulb with an appliance bulb of the
same or lower wattage, and reinstall the light
shield. When reinstalling the light shield, make
sure the top tabs snap securely into place. Re-
place the screw (on some models).
5. Reinstall the shelf and plug the refrigerator back
in.
37