Fagor FQ8925X Manual De Instrucciones página 45

Before you call for service...
Problem
Frequent "buzzing" sound
Ice cubes have odor/taste
Small or hollow cubes
Slow ice cube freezing
Cube dispenser does not work
Water has poor taste/odor
Water in first glass is warm
Water dispenser does not work
Water spurting from dispenser
Water is not dispensed but ice-
maker is working
No water or ice cube production
All manuals and user guides at all-guides.com
Possible Causes
Icemaker power switch is in the on posi-
tion, but the water supply to the refrig-
erator has not been connected.
Ice storage bin needs cleaning.
Food transmitting odor/taste to ice
cubes.
Interior of refrigerator needs cleaning.
Water filter clogged.
Door left open.
Temperature control not set cold
enough.
Icemaker turned off or water supply
turned off.
Ice cubes are frozen to icemaker feeler
arm.
Irregular ice clumps in storage con-
tainer.
Dispenser is LOCKED.
Water dispenser has not been used for
a long time.
Normal when refrigerator is first in-
stalled.
Water dispenser has not been used for
a long time.
Water system has been drained.
Water supply line turned off or not con-
nected.
Water filter clogged.
Air may be trapped in the water system.
Dispenser is LOCKED.
Newly-installed filter cartridge.
Water in reservoir is frozen.
Refrigerator control setting is too cold.
Supply line or shutoff valve is clogged.
Water filter clogged.
Dispenser is LOCKED.
What To Do
• Set the power switch to the off position. Keeping it in the
on position will damage the water valve.
• Empty and wash bin. Discard old cubes.
• Wrap foods well.
• See Care and cleaning.
• Replace filter cartridge with new cartridge or with plug.
• Check to see if package is holding door open.
• See About the controls.
• Turn on icemaker or water supply.
• Remove cubes.
• Break up with fingertip pressure and discard remaining
clumps.
• Freezer may be too warm. Adjust the freezer control to
a colder setting, one position at a time, until clumps do
not form.
• Press and hold the LOCK CONTROL pad for 3 sec-
onds.
• Dispense water until all water in system is replenished.
• Wait 24 hours for the refrigerator to completely cool
down.
• Dispense water until all water in system is replenished.
• Allow several hours for replenished supply to chill.
• See Installing the water line.
• Replace filter cartridge or remove filter and install plug.
• Press the dispenser arm for at least two minutes.
• Press and hold the LOCK CONTROL pad for 3 sec-
onds.
• Run water from the dispenser for 3 minutes (about six li-
ters).
• Call for service.
• Set to a warmer setting.
• Call a plumber.
• Replace filter cartridge or remove filter and install plug.
• Press and hold the LOCK CONTROL pad for 3 sec-
onds.
45