Installation Instructions; Symbol Description; Flow Diagram - Hansgrohe Focus E2 31926000 Manual Del Usuario


Safety Notes
Gloves should be worn during installation to prevent

crushing and cutting injuries.
The shower system may only be used for bathing,

hygienic and body cleansing purposes.
The hot and cold supplies must be of equal pressu-

res.

Installation Instructions

• The fitting must be installed, flushed and tested after
the valid norms.
• The mixer can not used together with a continuous
flow water heater.
Technical Data
Operating pressure:
Recommended operating pressure:
Test pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Recommended hot water temp.:

All manuals and user guides at all-guides.com
English
max. 1 MPa
0,25 – 0,5 MPa
1,6 MPa
max. 80°C
65°C
Assembly see page 31 + 32

Symbol description

To adjust the hot water limiter on single lever
mixers, please see page 33.
Do not use silicone containing acetic acid!
Dimensions (see page 34)

Flow diagram

(see page 34)

Rate of flow mixer

Rate of flow handshower
Spare parts (see page 37 + 38)
Special accessories
special tool (58085000) order as an extra
Installation kit order as an extra
Operation (see page 36)
Cleaning (see page 35) enclosed
brochure
Test certificate (see page 39)