Safety Instructions; Installing The App - nedis WIFILS51CRGB Manual Del Usuario

Mode button
5
Controller plug
6
IR receiver
7
LED strip
8
IR remote
9

Safety instructions

-
WARNING
• Ensure you have fully read and understood the instructions in
this document before you install or use the product. Keep the
packaging and this document for future reference.
• Only use the product as described in this document.
• Do not use the product if a part is damaged or defective.
Replace a damaged or defective product immediately.
• Do not drop the product and avoid bumping.
• Do not expose the product to water or moisture.
• This product may only be serviced by a qualified technician
for maintenance to reduce the risk of electric shock.
• Do not unplug the product by pulling on the cable. Always
grasp the plug and pull.
• Only power the product with the voltage corresponding to
the markings on the product.
• Wipe the battery terminals with a clean dry cloth if they are
dirty.
• Non-rechargeable batteries are not to be recharged.
• Do not short-circuit a battery.
• Children of less than 8 years should be kept away.
• Cleaning and user maintenance shall not be done by children
without supervision.
• Make sure to match the charger voltage to the voltage on the
battery markings. Wrong voltage can destroy the charger
and/or battery.
• The security circuit ensures that there is no voltage at the
battery clamps when there is no battery connected.
• Make sure to match the (+) and (-) polarity markings.
• Do not clean the inside of the product.

Installing the app

1. Download the Nedis Smartlife app for Android or iOS on
your phone via Google Play or the Apple App Store.
2. Open the Nedis Smartlife app on your phone.
3. Create an account with your mobile phone number or your
e-mail address and tap Continue.
4. Enter the received verification code.
5. Create a password and tap Done.
6. Tap Add Home to create a SmartLife Home.
Music mode
q
Speed buttons
w
Colour buttons
e
Start/stop moving
r
pattern
5