Ventamatic HeTR H1500 Manual Del Usuario página 5

1. Swivel-center hole
2. Key slots
3. Mounting bracket
4. 2x Quartz heating elements
5. Halogen lamp
6. Safety grille
7. Mounting arm
8. Arm release button
9. Power indicator light
10.Pull cord
Included hardware:
1 pc Lag Bolt: 1/4" x 2"
1 pc Fender Washer: 1-1/2" OD x 1/4" ID
2 pcs Hex Head/Star Drive Wood Screw: 3/16" x 1-1/2"
WARNING:This quartz heater is intended for use ONLY as a ceiling mounted heater.
Mounting on a wall or surface such as a roof creates a risk of fire due to possible over
heating of the unit or igniting nearby combustible materials.
DO NOT PLUG IN THE HEATER UNTIL IT IS PROPERLY INSTALLED.
1. CHOOSING A LOCATION FOR THE HEATER
Select a desired location on the ceiling. Keep in mind that the heater needs to be able
to reach a grounded outlet without the use of an extension cord. Always plug heaters
directly into a wall outlet/receptacle. Never use with an extension cord or relocatable
power tap (outlet/ power strip).
Important rules when positioning the heater:
1. Minimum clearance of 0.9 meters/3 feet away from the nearest wall or other
combustible material.
2. Attach on a ceiling which can support the weight of at least (5kg/11.2lbs).
3.To reduce the risk of fire, do not store or use gasoline or other flammable vapors and
liquids in the vicinity of the heater.
Ventamatic, Ltd. P.O. Box 728, Mineral Wells, TX 76068-0728
PARTS OF THE HEATER
INSTALLATION
5
1-800-433-1626 Fax: 940.325.9311 www.BVC.com
4