Bulova Accu-Swiss Serie Manual De Instrucciones página 3

SETTING NON-DATE MODELS
Step 1: Pull out the crown. Turn crown to move the hands forward (clock-
IN POSITION
wise) to set the time. Set the minute hand approximately 5 minutes ahead
of the desire minute marker, then turn back to the same marker.
Step 2: Push the crown back to the "IN" position.
OUT POSITION
SETTING DATE AND DAY/DATE MODELS
IN POSITION
OUT POSITION
INTERMEDIATE
POSITION
marker; then turn back to the same minute marker. For PM time first advance the hands past
12 o'clock midday, then set the time.
Step 4: When the time standard that you are using reaches the 60th second, push the crown to
the "IN" position.
Note: The date will change automatically at approximately midnight. The watch calendar uses a
31 day cycle. Therefore, at the end of any month with less than 31 days, the date must be
All manuals and user guides at all-guides.com
Step 1: When the second hand reaches the 60th second mark, pull the
crown to the "OUT" position. All hands will stop.
Step 2: Turn the crown to move the hands forward (clockwise) until you
see the date (for date only) or both day and date change (midnight).
Step 3: For AM time, continue to move the hands forward until the
minute hand is approximately 5 minutes ahead of the desired minute
3