Bulova Accu-Swiss Serie Manual De Instrucciones página 7

All manuals and user guides at all-guides.com
must go past 12 o'clock again (noon) to set the correct time.
4. When the time is set, push the crown back to position"1".
SETTING THE DAY AND DATE
1. Pull the crown to position "2" (See diagram).The watch will continue to run.
2. Turn the crown in one direction to set the Date, and in the opposite direction to
set the Day of the week.
3. Once the Day and Date are set, push the crown back to position "1".
Note: Do NOT set the Day/Date between the hours of 9:00 pm and 3:00 am. This may cause
the display to become incorrect when the calendar changes, and it would become necessary to
reset it again the next day.
THE CHRONOGRAPH (CHRONO)
A. Reading the Chronograph
1. The maximum Chrono reading is 12 hours.
2. The long Chrono second hand indicates elapsed one fifth Seconds (and Seconds) up to 60
seconds.
3. The small dial at the top shows elapsed Minutes. Please note that this dial reads to "30"
Minutes. It therefore goes around two times for each elapsed Chrono Hour.
4. Chrono Hours is indicated in the small dial at the bottom.
7