Bell FreeFit BE FREE Manual Del Usuario página 7

QUICKSTART
Current Speed (SPD)
Current Speed represents instantaneous speed. It is displayed on the upper screen. The speedometer
measures speeds up to 200Km/hr or 125 M/hr. If no keys are touched and no movement sensed from the
bicycle for five minutes, the speedometer will go into sleep mode. Press any key to reactivate.
Calories Burned (CAL)
Calories Burned is displayed on the upper screen. It represents the accumulated number of calories
burned while riding. The calorie count on the screen will start over once 999 calories have been
burned. Calories Burned can be reset at any time by pressing and holding the Left button when "CAL"
is displayed on the screen.
Speed Comparison (+ or -)
"+" or "-" appears next to the current speed. This function shows the positive or negative acceleration
of your current speed. If the current speed is higher than the average speed, a "+" is displayed on your
screen. If the current speed is lower than the average speed, a "-" is displayed on the screen. Shows
only when SPD function is on upper screen.
Speed Tendency
"Graphic" is the animation of the wheel moving.
Trip Distance (DST)
Press the Right button until "DST" appears. Trip Distance is displayed on the lower screen. It is activated
automatically with the bicycle in motion. Trip Distance can be reset by pressing and holding the Right
button for two seconds when "DST" is displayed on the screen. NOTE: Resetting Trip Distance will
7
automatically reset Trip Timer and Average Speed.
FreeFit_Manual4.indd 7 9/14/05 12:37:13 PM