Re-Engaging The Motor Drive System - SOMFY FX230 Manual De Instalación

To add a Telis type remote control:
[1] Press the "PROG" button on the controller
for two seconds. The red indicator comes on.
[2] Press the "PROG" button on the back
of the Telis remote control within two minutes.
The red indicator blinks.
The remote control is paired.
To exit the programming mode without pairing a remote control: Briefly press the "PROG" button on the controller.
Before starting up, check the electrical connections and the direction of motor rotation.
Position the gate half open.
When the button is pressed for the first time, the gate should open. If not, reverse the connections to the
electric motors.
Before starting, move the gate by hand to bring it to the closed position.

Re-engaging the motor drive system

[1] Lift the lock cover.
[2] Insert the release key and turn it counter clockwise by 90°.
[3] Check gate motion and the action of the limiting devices.
The "Suc" message is displayed showing that the operation has been performed correctly. If the operation is performed
in any other way, the "nSuc" error message is displayed and the operation is not performed.
AT THIS STAGE IN THE INSTALLATION PROCESS, THE MOTOR DRIVE SYSTEM IS READY TO OPERATE.
8
All manuals and user guides at all-guides.com
Copyright © 2008 Somfy SAS. All rights reserved.