Inspection / Maintenance; Environmental Protection - BGS technic 3480 Instruction Manual

PULLING LOAD

INSPECTION / MAINTENANCE

•
Perform required maintenance work regularly.
•
Check moving parts for freedom of movement and lightly oil them.
•
Check all components for cracks, breaks and the condition of the steel rope and any other
conditions that may affect the operation of the winch.
•
If defects are found, have the winch repaired before use. Note that many accidents are caused by
poor maintenance.
•
Do not make any changes to the winch. Do not replace or add any components that are not
intended to operate this winch.
•
Do not do any DIY repairs such as e.g. welding joints or replacing non-original components.
Improper repairs and unsuitable accessories or spare parts cannot guarantee reliable
functionality and lead to serious injuries.
INSPECTION OF STEEL ROPE
Do not use the product if the steel rope is damaged. The steel rope is damaged, when it is for
example kinked, twisted, frayed or only partially torn.

ENVIRONMENTAL PROTECTION

Dispose of this product at the end of its working life environmentally. Recycle unwanted
materials instead of disposing of them as waste. All tools, accessories and packaging
should be sorted, taken to a recycling centre and disposed of in a manner which is
compatible with the environment. Contact your local solid waste authority for recycling
information.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Abb.13
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed