Handling; Transport And Storage; Care And Maintenance; Performing Checks - Viega 2297.1 XL Manual Del Usuario

3 Handling

3.1

Transport and storage

3.2

Care and maintenance

3.2.1

Performing checks

3.2.2

Cleaning the press tools

Care for Viega system press tools
After use, clean the press tools and oil them lightly.
n
Store the press tools in a clean and dry place.
n
Protect the press tools from mechanical impact during transport.
n
For trouble-free operation, perform checks in regular intervals:
After every use, check the press contour of the press jaws, press
chains and press rings as well as the ball heads of the hinged
adapter jaws and the contact points of the press rings for damage
or visible wear.
Check the press jaws and press rings for smooth operation.
Carry out a test pressing with the press connector inserted, and
check the pressing point for formation of burrs.
In case of malfunctions, contact an authorised service partner.
Application and care should be carried out by specialists in
compliance with the servicing intervals.
Regularly clean the press contours of the press jaws, press rings
and press chains with fine steel wool or cleaning fleece to remove
deposits and avoid contamination (e.g. with Viega cleaning fleece,
article no. 104 412).
Lubricate the joints and moving components with maintenance oil
(article no. 667 924). Move the tools and joints while lubricating
them.
INFO! Note the pictures in chapter
points at the press tools" on page 10.
Every two years, have an authorised service partner (see
„Service partners" on page 12) carry out the maintenance.
Handling
Ä „Greasing the lubrication
Ä Chapter 3.3
9 from 14