Cameo STUDIO PAR DTW Manual De Usuario página 8

STANDALONE MODE STATIC (Static)
Select the mode "Static" ias previously described in STANDALONE MODES and confirm with ENTER. Overall brightness,
strobe, amber, cool white (C White) and warm white (W White) can now be configured separately to create an individual scene.
Menu structure
StaAlone ENTER
Static UP/DOWN
Please refer to values and descriptions of the stroboscope function as listed in the table below:
Values Description
000 – 005 Strobe open
006 – 010 Strobe closed
011 – 033 Pulse random, slow -> fast
034 – 056 Ramp up random, slow -> almost
057 – 079 Ramp down random, slow -> almost
080 – 102 Random Strobe Effect, slow -> fast
103 – 127 Strobe Break Effekt, 5s.....1s (Short burst with break)
128 – 250 Strobe slow -> fast <1Hz - 20Hz
251 - 255 Strobe open
SLAVE MODE
Press the MODE button repeatedly until "Menu" is displayed on the top line of the display. Use the UP and DOWN keys to select the menu item
"Slave" and press ENTER. The slave mode is now enabled. Connect the slave and the master units (same model) with a DMX cable and enable
one of the standalone modes on the master unit (Auto, Sound, CCTMacro, TunWhite, Static). Now the slave unit will follow the master unit.
Additional note: If a stand-alone mode is enabled, ensure that no DMX controller is connected.
Menu
ENTER
Slave
SYSTEM SETTINGS (settings)
Press the MODE button repeatedly until "Menu" is displayed on the top line of the display. Use the UP and DOWN keys to select the menu
item "Settings" and press ENTER. To edit settings, select the desired submenu item with the buttons UP and DOWN and confirm with ENTER
(see tables, note submenus).
Settings
Display Backlight = Display lighting
DMX Fail = operating status
with DMX signal
fault
8
Static Static
/
Intens Strobe
ENTER - UP / DOWN ENTER - UP / DOWN
Intens Strobe
000 - 255 000 - 255
ENTER ENTER
On
Off
Hold
Blackout
Static
/ /
Amber
ENTER - UP / DOWN
Amber
000 - 255
ENTER
Strobe
On permanently
Deactivation after approximately 1 minute of inactivity
Last command is retained
Activates blackout
Static Static
C White W White
/
ENTER - UP / DOWN ENTER - UP / DOWN
C White W White
000 - 255 000 - 255
ENTER ENTER