Cameo STUDIO PAR DTW Manual De Usuario página 9

Dimmer Curve = dimmer curve
Dimmer Response = Dimmer response
Redshift = accurately mimics
the colour drift
when dimming a
halogen spotlight.
When dimming
the spotlight, the
colour temper-
ature changes
automatically to
increasingly warm
white and amber
(and vice versa).
White Balance = Colour calibration
Fan settings = Adjusts fan speed
Autolock = Automatic locking
of the controls
Factory Reset = Reset to factory
setting
Linear Light intensity increases linearly with DMX value
Exponential Light intensity can be finely adjusted at lower DMX values and
broadly adjusted at higher DMX values
Logarithmic Light intensity can be broadly adjusted at lower DMX values and
finely adjusted at higher DMX values
S-Curve Light intensity can be finely adjusted at lower and higher DMX
values and broadly adjusted at medium DMX values
LED Lamp responds directly to changes in DMX value
Halogen Lamp behaves like a halogen spotlight with delayed brightness
changes and no colour change
Off Colour drift is disabled
On Colour drift is enabled
(For optimal halogen dimming characteristics, set dimmer
response to Halogen and colour drift to On.)
Dim to warm has no influence on color mixing by the LED color
channels Amber - WW - CW, as e.g. in DMX mode 3CH DIR.
Amber, Cold White, Individual colour calibration. Cross-mode brightness setting of the
Warm White 3 LED groups A, CW and WW with values from 000 to 255
Regular Automatic fan speed control
Silent Extra quiet fan with reduced brightness
Off Automatic locking of the controls is disabled
On Automatic locking of the controls after approximately 1 minute of
inactivity. Display shows: "LOCKED"
To unlock: Press and hold UP and DOWN simultaneously for
approx. 3 seconds
Factory Reset? ENTER = Reset / MODE = Cancel
9