Before Starting The Engine; Add Engine Oil - Briggs & Stratton Generac 1653-1 Manual Del Propietário

• Remove two front nuts from vibration mount on unit
with 13mm wrench. Use these nuts to retain the
mounting leg.
• Center the lifting handle on generator end of cradle.
Attach the handle using two 13mm wrenches with two
capscrews and two hex nuts.
BEFORE STARTING THE
ENGINE

Add Engine Oil

CAUTION!
Any attempt to crank or start the engine
before it has been properly serviced with the
recommended oil results in an engine failure.
• Make sure unit is on a level surface.
• Follow the oil recommendations and oil fill instructions
given in the engine owner's manual.
Generac Portable Products 3250 Watt Generator
NOTE: The generator's revolving field rides on a
pre–lubricated and sealed ball bearing that requires no
additional lubrication for the life of the bearing.
Add Fuel
WARNING!
fill fuel tank when engine is running or hot. Allow
unit to cool for two minutes before refueling. DO
NOT light a cigarette or smoke when filling the fuel
tank.
WARNING!
Always allow room for fuel expansion.
• Make sure unit is on a level surface.
• Follow the fuel recommendations and fuel fill instructions
given in the engine owner's manual.
7
NEVER fill fuel tank indoors. NEVER
DO NOT overfill the fuel tank.