Scope Of Delivery; Safety Instructions - Heylo HL 400 Manual Del Usuario

Ocultar thumbs Ver también para HL 400:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 49
7th stage
Ionization
By applying strong electric fields, ionizers can electrically charge individual air particles and thus
increase the ion concentration in the room air. The charged particles are more reactive and can thus
destroy odour molecules and other pollutants. At the same time, differently charged particles attract
each other and form larger lumps that sink to the ground faster and can be filtered out of the air more
easily.

2. Scope of delivery

1 x air cleaner HL 400
1 x pre-filter
1 x 2in1 carbon filter
1 x 2in1 antibacterial EPA filter
1 x Remote control
1 x instruction manual

3. Safety instructions

Target group: The manual is intended for the user who sets up and operates the device.
Copyright: The duplication of the manual in whole or in part is only permitted with written permission
from HEYLO GmbH.
Reservation: HEYLO GmbH reserves the right to make changes and improvements to the product
and manual at any time without prior notice.
Disposal: The device has been designed for many years of operation. If it has to be disposed of, the
competent legal regulations have to be observed in environmentally gentle manner.
Keep away from children: Do not let children play with or in the vicinity of the unit.
Electrical connection: The air cleaner HL 400 is designed for operation with 230 V / 50 Hz and 60
Hz. The connection has to be fused with 16A.
Use shockproof plugs and shockproof sockets only! The sockets have to be earthed or protected by
residual current circuit-breakers with at least 30 mA..
Protect the power cable from damage: Never use the device with a damaged power cable. If the
power cable is damaged, replace it with a cable of the same type and dimension.
Extension cables: Only use approved extension cables.
Handle with care: Do not drop or throw the unit, as this may damage components or wiring. Work on
a solid surface: Always place the device on a solid and plane surface.
Work on a solid surface: Always place the device on a solid and plane surface.
Keep dry: The device must not be operated in puddles or in standing water. Do not store or
operate outdoors. If the electrical wiring or parts of the unit get wet, the unit must be thoroughly
dried before re-using.
Keep the air openings free: Do not cover or block the air inlets and outlets.
Environment: Do not use in hazardous areas.
16
EN

Publicidad

Tabla de contenido
loading

Productos relacionados para Heylo HL 400

Tabla de contenido