Dometic MSI924M Instrucciones De Montaje Y De Uso página 18

Using the inverter
Setting the mains frequency
!
WARNING! Danger of electrocution
Only adjust the S3 DIP switch when the respective frequency for the
output voltage should be used.
You can set the mains frequency using the S3 dip switch.
Net frequency
50 Hz
60 Hz
Switching to energy-saving mode
You can set the energy-saving mode using the S4, S5 and S6 dip switches. In this
way, the battery you connect to the inverter is not discharged as quickly.
The inverter operates in energy-saving mode as long as the required power is below
the set level. If the required power exceeds the set level, the inverter works in normal
mode.
The values to be set on your inverter can be found in the following table:
Energy-saving
mode
Off
–
70 – 110 W
180 – 240 W
18
needed for usage with microwave
Dip switch
S4
Off
needed for usage with microwave
On
On
On
Dip switch
S3
Off
On
S5
Off
Off
On
On
MSI924M
S6
Off
Off
Off
On
EN