Replacing Batteries - Duronic IRT3W Manual De Instrucciones

• After each measurement, you can enter the memory mode and see past
temperature readings. For more details, see the previous section titled
'Recalling Records'.
• After each measurement, clean the temperature probe with a soft cloth,
and put the thermometer in a dry and well-ventilated place.
REMEMBER: It is dangerous to make a self-diagnosis or conduct
self-treatment based on the obtained measurement results
from this thermometer. If you think you or the person using the
thermometer could be unwell, or you are worried in any way, please
consult a doctor for advice and treatment.
If the low-battery symbol is displayed on the screen, it is time to replace the
batteries.
1. Slide the battery cover off along the marked
direction and take it off.
2. Insert the two AAA batteries into the
compartment according to the stated
polarities.
Make sure that the batteries are installed
correctly. Otherwise, the thermometer
may be damaged.
Batteries of a same type should be used.
Dispose of any used batteries safely and
responsibly in accordance with the local
council guidelines.
After Taking a Measurement

Replacing Batteries

23