Type of protection against electric shock: internally powered equipment.
Degree of protection against electric shock:
•
Degree of protection against ingress of water: IP22
•
Safety degree of using in flammable anaesthetic gas blending with air,
oxygen or nitrous oxide: Non-AP/APG
•
No application parts of the thermometer prevents defibrillation charge
effect.
•
No application parts of the thermometer output signal.
•
The thermometer is impermanent installed device.
•
The thermometer can be transported using general transportation tools.
•
Severe vibration, shock, or rain must be avoided during transportation.
•
The thermometer must be packaged and then stored in a well-ventilated
room without corrosive gas. The ambient temperature must be between
-20°C and +55°C(-4°F - 131°F), the relative humidity must be lower than
95% (non-condensing), and the atmospheric pressure must be 50 - 106
kPa.
EMC Information/Guidance and Manufacture's Declaration
CAUTION
•
The Infrared Thermometer IRT3W needs special precautions
regarding EMC and needs to be installed and put into
service according to the EMC information provided for in the
ACCOMPANYING DOCUMENTS.
•
Portable and mobile RF communications equipment can affect
Infrared Thermometer IRT3W.
•
The Infrared Thermometer IRT3W should not be used adjacent to or
stacked with other equipment.
Security Class
Storage and Transportation
28
Type BF applied part.