Using The Tool - SPIT Spitfire P370 Manual De Instrucciones

Fitting the charger disc
Inserting the stud
(without a magazine)
Pin indicating presence
of studs in the magazine
Inserting a strip of studs
(with a magazine)
Firing
Notice 010_GB.indd

Using the tool

Unlock the cover (see fig. 1).

Put the disc correctly into its housing

Close the cover

Insert the stud in the stud guide until it is held by the plastic guide

(see fig. 2).
Never use the flat of the hand to push
the stud back
When one or more studs are in the magazine, it is impossible to

insert another strip (see fig. 3).
The projecting pin indicates the presence of studs in the

magazine
Unlock the magazine's cover (see fig. 4).

Pull the magazine cover back

Insert the strip of studs

Close the magazine cover (automatic locking)

Apply the tool at right angles to the material (see fig. 5).

Hold the tool with both hands, exerting forward pressure, and

press the trigger. .
13 26/02/04, 7:51
GB
13