Maintenance And Storage - Duronic FN30 Manual De Instrucciones

If the fan does not function please check whether the power plug is correctly inserted
into the socket. Make sure that the cover does not come into contact with the blade.
If a noise can be heard when the fan is on, please check the following:
1. Make sure the blade is tightly inserted into the output shaft of the motor.
2. Make sure the back of the cover is properly inserted onto the groove of
the output shaft.
3. Make sure the edges of the blade are not damaged.
1. Unplug the unit and store the fan in a cool, dry location when not in use.
2. Never submerge the fan in water. To keep the fan clean, the outer shell may
be cleaned with a soft, damp cloth. You may use a mild detergent if necessary.
After cleaning, wipe the unit dry by using a soft dry cloth.
3. Do not use alcohol, gasoline, abrasive powders, furniture polish, or brushes
to clean the fan as this may cause damage and deterioration to the surface
of the fan.
4. Always ensure the fan is completely dry after cleaning before operating again.
Model
FN30
Troubleshooting

Maintenance and Storage

Specifications
Voltage
220V-240V
Frequency
50Hz
9
Power
60W