Duronic FN65 Manual De Instrucciones página 7

1. Set up the Pole
Take the exterior tube (part 17), loosen the pole
locknut (16) and pull out the inner steel tube (15)
adjusting to the required height. Re-tighten the screw
counterclock-wise to fix the poles to the correct
height.
2. Set up the Base and Attach the Pole
Unscrew the base bolt (21) from the bottom of the fan
base (18) counterclockwise. Insert the base weight
(19) and fixing plate (20) to the underside of the
base (18) and hold it in place, while at the same time
holding the assembled pole on the top side of the
base. Tighten it all together with the base bolt (21).
3. Setting up the Fan Head
Loosen the tightened
fastening nut (6) from
the fan head (8).
Place the back cover
(7) onto the head
and tighten it with the
fastening nut (6).
How to Set Up Your Fan
Place the fan blade (5)
on top of the fastening
nut.
Next screw on the blade
cap (4) to secure the fan
blade.
7
Put the front cover (1) on
top. Secure both covers
together using the cover
ring (2) and the cover
ring screw (3).