Publicidad
G
M
UK
IORDANI
ETROPOLITAN
STROLLER
HOW TO OPEN THE STROLLER
1.
According to Fig. 1a/1b/1c/1d, release the
folding hook, which keeps the stroller closed.
And then lift up the handle as the arrow
shown, the stroller will be opened fully when
you hear a CLICK.
ASSEMBLE THE WHEELS
2. Assemble front wheel:
as the show on Fig. 2a
Fix the front wheel axles into front legs hous-
es it is fixed when you hear a CLICK.
Assemble rear wheel:
as the show on Fig.
2b fix the real wheel axles into the rear wheel
houses, it is fixed when you hear a CLICK.
ATTENTION:
Please try to move and rotate
all the wheels by your hand to make sure all
the wheels are firmly fixed on wheel houses
before use.
SEAT UNIT ASSEMBLY
3.
Fasten the Velcro in the direction of arrow as
shown on Fig. 3a, and then attach the button to
the bottom of the seat pad. The seat unit is now
completely assembled, as shown on Fig. 3b.
4. Seat unit assembly:
As shown on Fig. 4a, fix
both adaptors A of the seat unit onto the seat
supporting base B simultaneously; they are
fixed together firmly when you hear a "CLICK".
5. How to fix the leg of footrest:
According to
Fig. 5a, press both sides of clips C with your
finger, then push the leg D into the plastic
connecting parts, it is fixed when you hear a
"CLICK" (see Fig. 5b).
6. How to fix the font handrail:
As shown on
Fig. 6a, grip the handrail and press down the
white buttons on both sides simultaneously,
and then fix the handrail onto both sides of
stroller, it is fixed when you hear a "CLICK".
7.
As shown on Fig. 7a/7b/7c, unzip the canopy
in the direction of arrow, then push the canopy
forward, the stroller is firmly opened.
HOW TO ASSEMBLE AND DISASSEMBLE
THE CANOPY
8. Canopy detachment:
Hold the plastic C and
push it out from the plastic holder slot D as the
arrow shown, see Fig. 8d/8e; See Fig. 8a, pull
MODULAR SYSTEM
(FROM 0 TO 36 MONTHS APPROXIMATELY)
out the canopy fabric as the arrow shown, see
Fig. 8f, pull out the iron bar E from the plastic
holder slot as the arrow shown, the canopy
can be detached completely.
9. Canopy assembly:
See Fig. 8a/8b Insert the
rear-end A of canopy fabric into the seat slot
B, one hand press and push the fabric into the
slot and another hand pulling the front of fab-
ric at the same time as the arrow shown, the
canopy can be assembled. See Fig. 9a, insert
the canopy post into the canopy base as the
arrow shown, make sure the dot G of base
fixed in the hole of post. See Fig. 9b/9c/9d,
Insert the front-end B of canopy fabric into
the front of canopy tube, then fix the tube to
the slot of canopy post as the arrow shown,
canopy be assembled completely, see Fig. 8.
HANDLE FUNCTION
10. Handle height adjustment:
down the one-hand-button, pull up or down
the handle. It is convenient to adjust the han-
dle height.
REVERSIBLE SEAT
11. Quickly release seat unit:
11b/11c, press down the safety lock on both
side of seat at the same time and lift it up. The
seat can take down quickly or put the seat unit
on the contrary direction.
ATTENTION:
Keep your child away from stroller
when you want to release the seat unit.
ADJUSTABLE SEAT
12.
Press down the adjustor on backrest or rotate
the knob, the angle of the backrest is adjustable.
The seat can be adjustable in 4 positions.
THE CONVERSION OF SEAT UNIT
TO SLEEPING COT
13.
Firstly, reverse the seat unit as shown on pic
13a, and press button 1 to adjust the seat
unit to horizontal position, then press button
2 in B way as shown on pic 13b, and finally
release the buckle 3 as shown on pic 13c to
change the seat unit into the sleeping cot as
shown on pic 13d; on the contrary, rotate the
button button 2 clockwise in A way, and fast-
ern the buckle 3 to change the sleeping cot
42
into the seat unit.
Kindly remind:
safe, always keep the sleeping cot face to you
when using it (see Fig. 13d).
BACKREST AND FOOTREST FUNCTION
14.
Press down the footrest buttons and move it
up and down, the footrest can be adjustable in
3 positions, see Fig. 14a.
QUICK RELEASE THE FRONT HANDRAIL
15.
See Fig. 15a. Press down the button on both
side, then pull out the handrail and the hand-
rail can be released quickly.
WHEELS FUNCTION
16. Front Wheel Lock:
ing lever as the direction of arrow when hear
a "CLICK" the wheel is locked in placed, as
shown in Fig. 16a.
17. Front wheels quickly taken-off:
Front wheel quickly-release button, the front
see Fig. 10, press
wheels will be released automatically.
18. Rear wheels brake:
pressing the lock lever as shown on Fig. 18a,
depress the brake lever in the same way to
release the stroller. (Red means in brake con-
dition, Green means in movement condition).
see Fig. 11a/
19. Detachable rear wheels:
19a, press the quick release button as the
direction of arrow, then you can pull out the
wheels quickly.
SAFETY BELT ASSEMBLY
20.
Pass the buckles of shoulder belt A and waist
belt B through the loops located on the seat
pad and the stiff board which hided in side of
seat pad. Make sure they are attached firmly
before use (see Fig. 20a/20b).
21.
Adjust the safety belt height, please pull out
the colth which mark in Fig. 21a. And then the
installation method same as the first points
which is shown in Fig. 20a/20b.
22.
Pass the crotch belt through the seat pad and
the stiff board which hided in side of seat pad
as the arrow shown on Fig. 22a. Always make
sure they are attached firmly before use. The
safety belts are correctly assembled as Fig.
22b.
SAFETY BELT DETACHMENT
23.
Detach the shoulder belt H and waist belt I by
pulling out the buckles from the seat pad (see
In order to ensure your baby
Fig. 23a).
ATTENTION:
- Please remove the seat belt from the stroller
while using as a sleeping cot.
- Please assemble all the seat belt fastenly in
the stroller while using as a seat.
24. Attach the buckles:
the buckles on the shoulder belt (C, D) on
the buckles of waist belt (A, B), And then at-
tached the waist buckles on the central buck-
le E until you hear a CLICK (See Fig. 24b).
Release the belt:
the central button to release the waist strap.
Pull the front wheel lock-
Adjust the seat belt:
waist strap according to the size of child in
comfortable position (See Fig. 24c) .
25.
The height of shoulder belt is adjustable by 2
Pre down the
positions (see Fig. 25a), the lowest position
(position 2) is only for the baby under 6 months,
and the position 1 are for the baby between 6
To apply the brakes by de-
months and 36 months.Adjust the height of
seat belt by pulling buckles out of the seat.
Then attach them into the same level, always
make sure the buckles are in their positions.
Kindly remind:
As shown on Fig.
when the child is in the baby stroller.
OPTIONAL ACCESSORIES
26. Assemble the car seat:
put the car seat onto the seat supporting base,
push down the car seat until you hear a CLICK.
27. Disassemble the car seat:
tional safety lock and raise the button with your
hand as shown in the picture; lift the child seat
upwards with the other hand at the same time
using the handle to unhook the seat from the
frame (see Fig. 27a).
Kinder Reminder:
necessary to check again the pull clasp after fix
the car seat onto the stroller frame, if the pull
clasp doesn't return completely, please push
the plastic part to the end.
28. Assemble the carry cot:
the supporting bases of the stroller, then push
43
ATTACH THE BUCKLES
(See Fig. 24a), attach
(See Fig. 24a), press down
Adjust the shoulder and
Always use the safety harness
HOW TO USE THE CAR SEAT
According to Fig. 26a,
Release the addi-
For security reasons, it is
HOW TO USE THE CARRY COT
Put the carry cot onto
Publicidad
