Idexx Quanti-Tray Sealer PLUS Manual Del Usuario página 4

Setting up the sealer
• Unpack the contents and save packaging for future shipping.
• Position the sealer on a level surface with the display facing you and with adequate space for trays to be inserted and
ejected. Ensure the fan is not blocked to allow air flow around the unit.
• Ensure that the power switch is turned off.
• Plug the power cord into the sealer and then into a grounded outlet of proper voltage (see product label).
• To connect the optional input shelf, center the holes over the corresponding tabs and press down.
Reverse button
Upper access door
Input slot
Fuse box
Power switch
Understanding the sealer display
Amber bars
Counter
4
Quanti-Tray Sealer PLUS User's Manual
Status light (not
a button)
Sleep mode button
Input shelf
Rubber insert with Quanti-Tray
Lower access panel
Exit slot
Fan
Counter: Number of trays that have been run through the
sealer.
Amber bars: Sealer is warming up.
Green bar: Sealer has warmed to sealing temperature.
Green bar
Moon icon
Moon (sleep)
Sleep Mode" section of this manual.
Alert
Alert icon with error code
shooting" section of this manual.
: Sleep mode is enabled. See the "Using
: See the "Trouble-