Description Of Device - Beurer LB 20 Instrucciones Para El Uso

8. entsorgung
Bitte entsorgen Sie das Gerät gemäß der Elektro- und Elektronik-Altgeräte-Verordnung
2002/96/EC – WEEE (Waste Electrical and Electronic Equipment). Bei Rückfragen wenden
Sie sich bitte an die für die Entsorgung zuständige kommunale Behörde.
Dear customer,
Thank you for choosing one of our products. Our name stands forhigh-quality, thoroughly tested
products for the applications in the areas of heat, weight, blood pressure, body temperature, pulse,
gentle therapy, massage and air.
Please read these instructions for use carefully and keep them for later use, be sure to make them
accessible to other users and observe the information they contain.
Best regards,
Your Beurer Team

1. Description of Device

1. Water tank
2. Evaporator head
3. Appliance plug
4. Power plug
5. Steam outlet nozzle
6 Aroma container
7. Output regulator (air humidification)
8. Fill level indicator
!
2. Important Information
– ATTENTION: As high temperatures prevail in this air humidifier, please take corresponding
precautionary measures, especially in the presence of children, and install the device in a
location inaccessible to children.
– Install the device so that the steam outlet nozzle is not pointed directly at other objects. The
exiting moisture could cause damage, for example to wallpaper.
ATTENTION: The exiting steam is hot: DANGER OF SCALDING!
– Protect the device from heat sources in the immediate vicinity, such as ovens, radiators or
direct sunlight.
– Avoid contact with hot surfaces.
– Only use the air humidifier in closed rooms.
– Do not store gasoline or other highly flammable substances near the device.
– Use only clean, cold tap water to fill the tank. Never add salt or other substances to the tap
water.
– Please note that the plastic is not compatible with essential oils, as this can cause deforma-
tions of the plastic. If you want to use essential oils or aromas, then clarify with the manuf-
acturer of the aromas whether they are compatible with plastic. The aroma container is made
of polypropylene (PP).
– Never add aromas to the water (only in the aroma container). Please note that all cleaning
agents must be carefully removed after cleaning the device before using it again.
– Make sure that the device is not overfilled, even when the evaporator head is mounted.
– Ensure firm locking of the evaporator head.
– Only place the device on firm, level, waterproof surfaces.
– Never hold your hands or face over the evaporator during operation.
eNGLIsH
6