Items Supplied; Technical Data; Getting Started; Proper Use - ALPHA-TOOLS AET 750 Manual De Instrucciones

Anleitung AET 750 29.11.2005
Dear Customer,
Before you use your electric stapler/nailer for
the first time, please read these directions for
use and note the instructions for operating and
looking after your new tool.
Always keep these directions for use together
with the stapler/nailer.

1. Items supplied

1 electric stapler/nailer

2. Technical data

Power supply: 230 V ~ 50 Hz
Shots per minute:
Staple width
Staple length 10 - 16 mm
Staple thickness 0.8 - 1.3 mm
Nail length 10 - 16 mm
Nail thickness 0.8 - 1.3 mm
Weight:
Totally insulated
Sound pressure level LPA 84,3 dB(A)
Sound power level LWA 97,3 dB(A)
Vibration a w 6,737 m/s
N.B.:
It is important to wear suitable protective
clothing, and particularly safety goggles,
when working with the electric stapler/nailer.
Please follow the safety instructions.

3. Proper use

The electric stapler/nailer is designed for the
stapling and fastening of textiles, leather and
wood using the correct staples and nails.
It is designed for intermittent operation only. If
used continuously, the stapler/nailer will
overheat and cease to perform as efficiently.
In the event of overheating, take a break from
your work and allow the stapler/nailer to cool
down.
11:08 Uhr Seite 7
CAUTION!
For your own safety, use only staples and
nails listed in the directions for use. The use
of staples and nails other than those listed
in the directions for use may result in risk of
injury.
Be sure to pull out the power plug whenever
the tool is not being used, each time before
carrying out any maintenance, and whenever
you want to change the staples or nails!

4. Getting started

• Loading the staples, Fig. 1-3
20
Switch off the electric stapler/nailer and pull out
10 mm the power plug.
Press on the magazine lock and push it down
(Abb. 1).
1
0.95 kg
II / ®
2
Pull the magazine slide out of the back of the
electric stapler/nailer (Fig. 2).
2
GB
7