Daily Maintenance - Inoksan BYM052 Manual Del Usuario

10.DAILY MAINTENANCE

1. The wash water must be renewed at least two
times a day or when the water loses its ability
to clean due to dirty particles. Washing
performed with dirty wash water causes bad
washing results, along with detergent, polisher
and power wastage.
2. Before starting maintenance activities, turn off
the power switch that the device is connected
to.
3. Be careful so that the dirty water outlet is not
blocked.
4. Check whether the washing and rinsing arms
can turn easily. Check the water sprays and if
they are blocked, clean the holes with a thin
stick.
5. Leave the cover open after cleaning the
device.
WARNING; In order not to damage the
electrical equipment, clean the device with
a direct or high pressured water.
11.PERIODIC MAINTENANCE(  once every
2-3 days)
1. Never do maintenance while the device is
powered.
2. As shown in Figure 1, materials that can cause
blocking must be cleaned by taking out the
nozzles of the water sprays.
3. Clean the outer surfaces of the device with a
wet and soapy cloth. While cleaning the
surface of the device, do not use materials that
can leave marks on the surface such as
detergents, wire brushes etc. which have
abrasive content.
4. Clean the device warmers with an anti-lime
once a week.
5. Take out and clean the pump front filter in
certain periods.
PROBLEM
1-Dishes are not clean.
2-Dishes are getting broken.
POTENTIAL PROBLEMS - CAUSES - SOLUTIONS
CAUSE
-Washing arms may be stuck.
-Washing water sprays may be
blocked.
-Rinsing water sprays may be
blocked.
-Detergent concentration may be
very high or insufficient.
-Filter may be blocked.
-Washing time may be insufficient.
-Proper tray may not have been
used.
6. If the device will not be used for a long time,
the surfaces need to be covered with Vaseline
in thin layers.
7. Contact the authorized service in case a
dangerous situation is noticed in the device.
Do not let unqualified people to interfere the
device.
8. After a certain operating duration, depending
on the hardness of water, the calcium and
magnesium in the water can cause the forming
of boiler scale on the interior surfaces of the
wash tank, boilers and interior sections of the
water pumps which can affect the devices
performance. For this reason, a boiler scale
cleaning process must be performed by a
qualified technician over time.
9. Maintenance of the boilers, emptying the
water inside the boiler and pump and cleaning
them must be performed by qualified people
periodically.
10.If there is a danger of freezing during the
times when the machine hasn't worked for a
long time, the wash pump and boiler must be
emptied.
11.Contact the authorized service in case a
dangerous situation is noticed in the machine.
Do not permit unqualified people to interfere
the device.
Child safety
This device is dangerous and forbidden
to use by children under 8 years of age
and by people who have a lack of
physical, sensory or mental abilities or
experience and knowledge (disabilities)
without supervision of user.
Playing with the device by children is
dangerous.
Cleaning and maintenance should not
carried out by children without the
supervision of user.
-Check whether the dishes prevent arms from rotating.
-Clean the water sprays by removing the washing arm.
-Clean the water sprays by removing the rinsing arm.
-Check the hardness of water.
-Check the detergent amount.
-Remove and clean the filter.
-Select a longer wash period or repeat the same period.
-Be careful when selecting the tray.
-Comply with its capacity.
13
SOLUTION