Xylem YSI MultiLab 4010-1 Manual Del Usuario página 5

MultiLab 4010(P)-1W
Display (example: pH measurement)
3
2
AutoCal TEC
1
HOLD AR
01.07.2011
Info
Jack field /connections
Initial
commissioning
Caution
Follow the safety instructions of the used sensors.
The operating manuals of the sensors are available on the supplied CD and on
the Internet under www.YSI.com.
ba76149y04 03/2018
All manuals and user guides at all-guides.com
USB output
08:00
2 3 4
1
1 Insert the supplied batteries.
Make sure that the poles are in the correct position.
2 Connect the power pack if necessary.
3 Switch on the meter with the <On/Off> key.
1 Status information
4
2 Measured value (with unit)
3 Measured parameter
4 Continuous measurement control
(CMC function)
5
5 Sensor symbol
(calibration evaluation)
6
6 Measured temperature (with unit)
7 Softkeys and date/time
7
1 IDS sensors
(pH, conductivity, D.O.)
2 USB B interface (device)
3 ProOBOD
4 Connection for line adaptor
5 Service interface
5
EN
English
5