Sensor Control - Hamilton Beach HIR400 Manual Del Usuario

840159100 ENv02.qxd 1/10/07
Features
Adjustable Steam Dial
This dial provides minimum steam for
wool or maximum steam for linen. Set
the dial to O to change to Dry Iron.
Easy Mist ™ Button
Push the Easy Mist ™ Button to
release a fine spray of water for
difficult wrinkles in cotton or linen.
Power On/Auto Shutoff Indicator
This light comes on when the iron is
plugged in. The light will remain on
even if the Temperature Control Dial is
turned to off. The light will stay on until
iron is unplugged.
All manuals and user guides at all-guides.com
3:17 PM Page 6
6

Sensor Control

This iron is equipped with a position/motion sensor. This means
that if the iron is left motionless it will turn off automatically and
cool to room temperature. To restart iron, tilt downwards then
tilt back onto heel position and allow it to reheat. The iron
senses motion and will not shut off as long as it is in motion.
Position Sensing
The iron will turn off automatically when left in the following
positions. The auto off time varies based on the iron's position.
Resting on Soleplate = 30 seconds
Resting on Either Side = 30 seconds
Resting on Heel = 15 minutes
NOTE: The Power On/Auto Shutoff
Indicator will blink after the position
sensing times noted above.
Retractable Cord
1. Pull cord to desired length. Do not
unwind beyond colored tape indicator.
2. To store cord, press and hold the Cord
Release Button while guiding the cord
into the storage area.
CAUTION: Hold plug while retracting
cord. Do not let cord retract freely.
Cord may jam on reel or loose cord may whip back and
forth and could cause injury.
7