Fujitsu Airstage UTY-RNK Serie Manual De Funcionamiento página 10

WEEKLY TIMER
To start/cancel the WEEKLY timer operation
G To start
The independent timer
will flash on the display.
Press the " TIMER MODE / CLOCK
ADJUST" button to start the timer
mode.
When the weekly timer is selected, the
timer starts automatically.
NOTES
(1) PRECAUTIONS DURING WEEKLY TIMER SETUP
Setup is not possible in the following cases, so amend
the time.
• Be sure to set the ON time first, then the OFF time. If
either the ON time or the OFF time is not set cor-
rectly, the timer will not operate properly.
• The WEEKLY 2 settings cannot be set earlier than the
WEEKLY 1 settings.
• The WEEKLY 1 and WEEKLY 2 time spans cannot
overlap.
To set the DAY OFF (for a holiday)
1
During the weekly timer,
press the "TIMER SET" but-
ton for 2 seconds or more
to set the day.
NOTES
(1) The DAY OFF setting is only available for days for which weekly settings already exist.
(2) If the operating time carries over to the next day (during a next day setting), the effective DAY OFF range will be set as
shown below.
G Normal
ON OFF
WEEKLY
Preceding day
(3) The DAY OFF setting can only be set one time. The DAY OFF setting is cancelled automatically after the set day has
passed.
En-9
ex. Operating time AM7:00-
The operating time for the current
day is displayed.
2
Press "DAY / DAY OFF" and
select a day to set the DAY
OFF.
ex. The DAY OFF is set for Monday.
DAY OFF
ON OFF
WEEKLY
Setting day Next day
3 6 9 12 15 18 21
PM6:00 Indpnd. OFF time
PM9:00
(2) The earliest OFF time you can set is 30 minutes after the
ON time.
(3) The OFF time can be carried over to the next day.
(4) The earliest independent OFF time you can set is 30 min-
utes after the last OFF time.
(5) An independent OFF time can be set up to 0:00 hours of
the next day.
(6) Even if the timer operation is set, the timer indicator lamp
of the indoor unit does not light up. (The timer indicator
lamp is used for wireless remote controllers only.)
3
Press the "DAY / DAY OFF"
button for 2 seconds or
more to set the DAY OFF.
G Next day setting
ON
WEEKLY
Preceding day
G To cancel
• Press the "TIMER DELETE" button
to cancel the timer mode.
• The timer mode can also be
canceled by changing the timer
mode using the "
/ CLOCK ADJUST" button.
4
Press the "TIMER SET" but-
ton for 2 seconds or more
to complete the DAY OFF
setting.
Flashing mark:
Indicates the DAY OFF
G To cancel
Follow the same procedures as
those for setup.
DAY OFF
OFF ON
WEEKLY
Setting day
TIMER MODE
OFF
Next day