All manuals and user guides at all-guides.com
DoorLock DM100, DP100
DP100 only:
Fault
Red LED flashes ten times.
Both LEDs flash ten times.
Red LED flashes ten times.
Green LED flashes five
times, then the green LED
turns off for a second.
Sequence repeats infinitely.
Both LEDs are light up, then
the green LED turns off, then
the red LED turns off.
Sequence repeats infinitely.
Both LEDs are light up, then
the red LED turns off, then
the green LED turns off.
Sequence repeats infinitely.
13
Warranty
The statutory warranty period applies. If the product is defective, please
contact your retailer or the manufacturer's branch in your country (see the
back of the instruction manual for the addresses).
For repair and guarantee processing, please include the following docu-
ments when you send in the device:
A copy of the receipt with purchasing date
A reason for the claim or description of the fault
EN
Cause
Not a Mifare
transponder coded for
the application.
The access point is not
configured.
No valid configuration
card.
Error in the data stor-
age.
Error in the RFID
module.
Error in the RFID
module.
Warranty
Remedy
➤ Use a Mifare tran-
sponder coded for the
application.
➤ Configure the access
point.
➤ Use a valid configura-
tion card.
➤ Contact the customer
service.
➤ Contact the customer
service.
➤ Contact the customer
service.
37