Scooty SCOOT149 Manual De Instrucciones página 14

3.2. UNPACKING AND ASSEMBLING THE DEVICE
EN
To unpack the product, it is recommended to have a clear surface that is
large enough to unpack and prepare the device. Take the device out of its
packaging, making sure to not injure yourself or damage other products or
your surroundings. Have someone help you if the product is too heavy for you
to handle on your own (the weight of the device is indicated on the packaging).
An adult must unpack and assemble the device.
Mounting the pedals :
Use the R (right) and L (left) markings to identify them.
1. Mount the right pedal on the right crank arm. Tighten the pedal clockwise
using the wrench provided.
2. Then screw the left pedal onto the left crank arm counterclockwise.
Mounting the handlebar :
1. First orient the handlebars in the right direction.
2. Tighten the fixing screw on the stem using the wrench provided.
3. Check that the handlebars are correctly oriented.
Assembly and adjustment of the saddle:
Loosen the nut on the seat post clamp to be able to change the height of the
seat post in the frame.
Select a height and tighten the seat post clamp nut. When adjusting the
saddle to its lowest position, make sure that the saddle does not touch any
component of the bicycle such as the battery cover. Also, be sure not to
exceed the minimum seat tube insertion mark. This insertion mark should
never be visible when using the bike.
IMPORTANT : To determine your saddle height, sit on the bicycle and place a
heel on the pedal in the down position with the crank parallel to the seat post.
When your leg is extended the saddle height is correct.
14