Important - Scooty SCOOT149 Manual De Instrucciones

LUBRICATION
EN
Lubrication is essential on the various components that are in motion to
prevent corrosion. Oil the chain regularly, brush the sprockets and chainrings,
periodically introduce a few drops of oil into the brake and derailleur cable
housings.
It is advisable to first clean and dry the components to be lubricated. It is
advisable to use oil specifically for the chain and derailleur. Grease should be
used for the other components.
PNEUMATICS
It is strongly recommended to check tire pressure periodically. Driving
with under-inflated or over-inflated tires can impair performance, cause
premature wear, cause rim damage, reduce range or increase the risk of
accidents. If severe wear or a notch is visible on any tire, replace it before
riding the bicycle.
IMPORTANT : A pressure range is indicated on the sidewall of the tire by the
manufacturer. The pressure must be adjusted according to the user's weight.
BRAKES
Before each use, check that the front and rear brakes are in perfect
working order. Check the brakes regularly to prevent accidents due to brake
malfunction.
The brake lever must not come into contact with the handlebars and the
sheaths must not be at a closed angle so that the cables slide with the
minimum of friction. Damaged, frayed, rusted cables must be changed
immediately.
WARNING: In rain or wet weather the braking distances are extended.
RIMS
Check the condition of the rim and clean it if it is dirty to avoid premature
deterioration. Do not ride with a damaged or cracked rim that could cause an
accident.
CABLES
Make sure that the cable ports are not loose or broken.
SCREW
Check the screws in the main parts, and make sure to tighten them regularly.
Vibrations of the unit while driving cause vibrations that loosen the screws.
22