Programming Mode - Lutron Grafik Eye QS Guía Rápida De Instalación Y Funcionamiento

Programming Mode

Entering and Exiting Programming Mode
Main menu To enter programming mode:
Press and hold the top and bottom scene
Timeclock
buttons simultaneously for 3 seconds. The
Scene setup
LEDs in the scene buttons will scroll from
top to bottom, confirming that you are in
programming mode, and the info screen will
display the main menu.
To exit programming mode:
Scene 1
Press and hold the top and bottom scene
Fade time buttons simultaneously for 3 seconds. The
3 seconds
info screen will go to Scene 1.
Navigating Menus in Programming Mode
Master Buttons
The Master buttons allow you to move through the menu
choices. The current choice is highlighted on the info screen.
OK Button
The OK button chooses the current highlighted menu choice.
This will either take you to the next menu or accept a setting you
have selected. When the screen displays a Yes/No question, the
OK button is "Yes".
Timeclock Button
The timeclock button functions as a "back" button during
programming mode. Pressing the timeclock button takes you
back one step in the current menu. Pressing it repeatedly
will eventually return you to the main menu, but will not exit
programming mode. When the screen displays a Yes/No
question, the Timeclock button is "No".
®
1 9 2 10 3 11 4 12 5 13 6
For additional information, see the complete installation and operation guide at www.lutron.com/qs
14 7 15 8 16
9-16
1-8
OK
GRAFIK Eye QS with DALI Quick Installation and Operation Guide 9
®
Master buttons
OK button
Timeclock (back) button
Press and hold the top and
bottom buttons for 3 seconds
to enter or exit programming
mode