NuTone 695-220 Instrucciones De Instalación página 2

DUCTING
1. Refer to Figures 3 and 4. Run 3" round duct from the
discharge opening to the outside of the home.
INSTALLING THE FAN AND GRILLE
1. Refer to Figure 1. Insert the two tabs on the motor plate
into slots in housing.
2. Push the motor plate into the housing until the plate snaps
firmly in place. Make sure the blower wheel turns freely.
3. Insert the motor plug into the housing's receptacle.
4. To install the grille, compress the spring clips and insert in
the slots on either side of the motor plate. Push the grille
up into place on the ceiling.
HORIZONTAL AND
HORIZONTAL TO
VERTICAL
DISCHARGE
90° ELBOW
FAN IN
CEILING
ROOF CAP
WALL CAP
3" DUCT
FIGURE 3
VERTICAL AND
VERTICAL TO
HORIZONTAL
DISCHARGE
3" DUCT
FAN IN
WALL
Product specifications subject to change without notice.
4820 Red Bank Road, Cincinnati, Ohio 45227
Printed in U.S.A., Rev. 4/01, Part No. 86573
ROOF CAP
90° ELBOW &
CAP ASSEMBLY
FIGURE 4