Publicidad
CHARGING THE BOOMSTREAM mini
Note: the BOOMSTREAM mini will need to be fully
charged prior to initial use (approx. 3.5 hours).
1. Connect the mini-USB end of the charge
cable to the mini-USB port on the
(Figure 1, "A").
2. Connect the USB end of the charge cable to the
USB port of a computer or AC adapter (not included).
3. The LED indicator (Figure 1, "B") will turn solid RED
while charging and will turn off when fully charged.
CHARGEMENT DU BOOMSTREAM mini
Remarque: Le BOOMSTREAM mini ne sera
pas entierement charge
avant la premiere utilisation (env.
1. Branchez l'extremite mini-USB du c/lble
de charge au port mini-USB sur le
BOOMSTREAM mini (Figure 1, «A»).
2. Branchez /'extremite USB du cable de
charge au port USB d'un ordinateur ou d'un
adaptateur CA (non inc/us).
3. Le temoin lumineux DEL (Figure 1, « B
deviendra rouge continu /ors du chargement
et arreter /orsque le chargement sera /ermine.
USING THE BOOMSTREAM mini
Pairing
1. Make sure Bluetooth is turned on in your
device's settings.
2. Turn on BOOMSTREAM speaker . The
speaker will automatically search for devices.
The LED indicator will flash BLUE once every
second while in search mode.
3. In your device's Bluetooth menu search for and
select "SCOSCHE BTSPK1".
4. When pairing is completed, the LED will flash quickly and an
audio tone will sound. While connected the LED will continue to flash
BLUE once every 5 seconds.
Note: The speaker will automatically pair with the most recently paired available device.
Button Functions:
Play/Pause: Press once to begin or pause playback. Press and hold to disconnect Bluetooth
Volume (-): Press and hold to reduce volume (and audio tone will signal minimum volume).
Press (-) once to go to previous track.
Volume (+): Press and hold to increase volume (an audio tone will signal maximum volume).
Press once to go to next track.
7)� ( '&
RECARGA DEL boomSTREAM mini
Nota: el BOOMSTREAM mini debe estar
completamente cargado antes de su uso inicial
3,5
heures).
(aprox.
1. Conecte el extremo mini-USB def
cable de carga a la entrada mini-USB def
BOOMSTREAM mini (Figura 1, "A").
2. Conecte el extremo USB de/ cable de
carga al puerto USB de una computadora
o de un cargador de CA (no incluido).
3. El LED indicador (Figura 1, "B'� se
»)
encendera en ROJO s6/ido mientras
este cargando, y detiene al terminar la carga.
� m��-
�
3
FIGURA 1
FIGURE 1
I'
�
3,5
horas).
✓
FIGURE 2
FIGURA2
· ·;}
� @
· · · �
o =
Publicidad
