Descargar Imprimir esta página

IPC Soteco 300 Serie Manual De Uso Y Mantenimiento página 6

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 9
GB
DESCRIPTION AND ASSEMBLY
A - Motor block.
B - Switch.
D - Float: its purpose is to avoid that liquid may goes
inside motor block during suction.
E - Polyester fi lter to set into the tank to pick up dust,
and to remove for liquid suction.
F - Hooks for tightening of motor block to tank.
G - Suction inlet.
H - Tank.
L - Flexible hose.
M - Tube.
N - Adaptor.
O - Wand.
P - Round brush.
Q - Flat lance.
R - Dust tool.
S - Wet tool.
T - Carpet tool.
ATTENTION: In order to keep in good effi ciency the machine it is
useful to clean the polyester fi lter after each utilization.
INDICATIONS TO BE SCRUPULOUSLY ADHERED TO
• This apparatus is not to be used by people (children included) with
reduced physical, sensorial or mental capacities or without any
experience and knowledge, unless they did not receive instructions
relative to the use of the apparatus and are controlled by a person
responsible for their safety.
• Children should be controlled so that they didn't play with the
apparatus.
• The packaging components could constitute potential dangers (as
for example plastic bags): they must be kept away from children' s
reach and from other people or animal not conscious of their actions.
• Any different use from that indicated in this manual could constitute
a danger, therefore, it must be avoided.
• ATTENTION: Don't ever point the suction opening towards delicate parts
of the body – of people or animals - such as eyes, ears, mouth, etc.
• ATTENTION: if the apparatus is fi tted with a supplementary plug, do
not exceed the power reported on the plug. Non-compliance with
this norm could cause fi res and damages even lethal to the user.
• ATTENTION the apparatus is not suitable for areas protected
against electrostatic discharges.
• ATTENTION: use only the brushes supplied with the apparatus
or those specifi ed in the instruction manual. Using other brushes
could jeopardize safety.
• ATTENTION: Do not leave the functioning apparatus unattended,
always remove the plug from the socket when not using the
apparatus and store it away from the reach of children or people
who are not conscious of their own actions.
• ATTENTION: in case o foam or liquid discharge switch off
immediately.
• ATTENTION: in case tipping over, lift the apparatus before switching off.
• ATTENTION: when using the carpet cleaner do not exceed the power
recorded on the aspirator supplementary accessories plug. Ensure
that the feeding voltage of the electro-utensil corresponds to that
recorded of the tag of the aspirator' s technical data. Non-compliance
with these rules could cause fi re and lethal damages to the user.
• ATTENTION: The supplementary accessories plug is to be used
only when the apparatus is set for dust suction. The inobservance
of these rules may lead to causing fi res and constitute mortal
danger to the user.
• ATTENTION: This apparatus is not suitable for recollection of
dangerous dust. Do not exhaust toxic, explosive, fl ammable or
6
All manuals and user guides at all-guides.com
OPERATING INSTRUCTION
- Insert the cloth fi lter in the tank (Fig. 1).
- Assembly the head on tank and block it by hooks (Fig. 3)
- Connect the fl exible hose into the inlet (Fig. 4).
- Connect the wand and the extensions to other side of
- Select the most suitable accessory (Fig. 6).
- Connect the plug to power socket then switch on the
- Example of use of fl at lance (Fig. 8).
- Example of use of round brush (Fig. 9).
- Example of use of brush for fl oor cleaning (Fig. 10).
- If a paper bag is provided, insert it in the tank on the
LIQUID SUCTION / OPERATING INSTRUCTION
- Remove the cloth fi lter bag (Fig. 2).
- Assembly the head on tank and block it by hooks (Fig. 3)
- Connect the fl exible hose to the inlet (Fig. 4).
- Connect the extension to other side of fl exible hose (Fig. 5)
- Connect the wet tool (Fig. 6).
- Connect the plug to power socket then switch on the
- Example of use of wet tool (Fig. 11).
USE OF OPTIONAL ACCESSORIES
- Example of use of carpet tool (Fig. 13).
• Every part of the apparatus must be correctly assembled before
• Ascertain that the values indicated on the engine block correspond
• Do no aspire water from containers, sinks, basins, etc.
• Do not aspire aggressive detergents because they could damage
• Do not aspire materials that could damage the fi ltering elements
• Do not ever pull or lift the apparatus through the electrical cable.
• Do not immerge the apparatus into water and neither use water
• Always remove the plug from the socket before performing any
• Regularly control the feeding cable looking for damages, cracks
• The substitution of the damaged cable must be done by the tech
• When using electrical extensions, make sure that these are
• The hollow sphere stops the exhaustion when the drum is fi lled
• Clean every part of the apparatus after using it; empty the tanks, shake
• Specialized personnel must always carry out maintenance and repairs;
• ATTENTION: it is forbidden to carry out changes to the apparatus.
• The manufacturer declines any responsibility for damages caused
fl exible hose (Fig. 5).
equipment (Fig. 7)
defl ector (Fig. 12)
equipment (Fig.7)
incandescent substances. The maximum temperature allowed
is (40°C / 104°F) (120°C / 478°F).
using it. Verify, furthermore, that the fi ltering elements have been
correctly and effi ciently assembled.
to those of the network to which you intend to connect the apparatus
and that the socket is compatible with the plug.
the apparatus.
(such as glass, metal etc.).
jets to clean it.
operation.
or ageing. Substitute the cable before using it further.
assistance service or by competent authorized personnel with
recognized qualifi cation.
compatible with the power cable and that it does not touch liquids
or conductive surfaces.
with liquids or tipping. Check regularly that it does not present any
damage and that its movement is not impeded. Perform cleaning
or substitution whenever necessary.
the fi lters and use humid cloth over its surface before storing it.
any damaged part must be substituted with original spare parts.
Tampering could cause fi res and damages even lethal to the user
and the forfeiture of the guarantee.
to people or things due to non-compliance with these instructions
or if the apparatus is unreasonably used.

Publicidad

loading

Este manual también es adecuado para:

400 serie500 serie600 serie