Descargar Imprimir esta página

Wearing The Headphones; Pairing The Headphones With A Bluetooth - Silvercrest SKBA 2 A1 Instrucciones De Uso

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 84
All manuals and user guides at all-guides.com
NOTE
The operating/charging LED 0 lights up orange during charging .
When the battery is fully charged, the operating/charging LED switches
off .
Charging takes about 3 .5 hours at a charging current of 500 mA .
When the battery is fully charged, you can play back music for about
20 hours at a medium volume in headphone mode or for up to 5 hours
in speaker mode . The playback time may vary depending on usage
(volume) .
When the battery is empty, you will hear two beeps at an interval of
two minutes, and the operating/charging LED 0 flashes three times or-
ange every 15 seconds . The headphones then switch off automatically .

Wearing the headphones

When putting the headphones on, please note the side markings "R"
(right) and "L" (left) on the inside of the head band 1 .
Adjust the headband 1 so that it fits your head comfortably and the
earpieces e + r cover your ears .

Pairing the headphones with a Bluetooth

Before you can use the headphones with the Bluetooth
must pair it with a compatible Bluetooth
To switch on the headphones, press and hold the
until you hear a rising series of beeps and the operating/charging LED
0 lights up violet for 2 seconds . Afterwards, the operating/charging LED
flashes blue once every 3 seconds .
Press and hold the PAIRING button 4 until the operating/charging LED
0 flashes alternately orange and blue to activate pairing mode .
Set the Bluetooth
devices . A detailed description of how to do this can be found in the oper-
ating manual for your Bluetooth
Select the entry SKBA 2 A1 from the list of found devices on your
Bluetooth
®
to connect the two devices . If the pairing is successful, you will hear
a rising series of beeps and the operating/charging LED 0 flashes
blue twice at 3-second intervals .
24 
GB │ IE
playback device so that it scans for Bluetooth
®
playback device and, if required, enter the code 0000
®
device .
®
playback device .
device
®
®
function, you
button 5
SKBA 2 A1
®

Publicidad

Solución de problemas

loading