Controlling Music Playback - Silvercrest SKBA 2 A1 Instrucciones De Uso

All manuals and user guides at all-guides.com
NOTE
After you have successfully paired the headphones with a Bluetooth
►
playback device, they will automatically try to connect to this device
the next time you switch them on . Automatic reconnection only works
if you have not terminated the Bluetooth
manually beforehand .
► Ensure that the headphones are no more than 10 metres away from the
Bluetooth
electronic devices placed between them .
► If no connection can be made within 10 minutes, pairing mode ends
and the headphones switch off .
To terminate the Bluetooth
♦
Bluetooth
®
down the PAIRING button 4 for approximately 2 seconds until you hear
a rising series of beeps, and the operating/charging LED 0 flashes red
and blue . The headphones will return to pairing mode .
Switch the headphones off to deactivate the Bluetooth
♦
off the headphones, press and hold the
a rising series of beeps and the operating/charging LED 0
goes out .

Controlling music playback

The following music playback functions are only available when the head-
phones and the playback device are connected via Bluetooth
Some smartphones, music apps or music players may not support all
functions .
Button
5
7
8
SKBA 2 A1
playback device . Make sure that there are no barriers or
®
®
function on the Bluetooth
► Press briefly to play/pause the music .
► Press briefly to increase the volume . When you
reach the maximum volume you will hear a
beep .
► Press and hold to jump to the next track .
► Press briefly to decrease the volume .
► Press and hold to jump back to start of the track .
Press and hold again within 2 seconds to jump
to the previous track .
® connection of the devices
connection, either disable the
® playback device or hold
Function
® . To switch
button 5 until you hear
.
®
GB │ IE │
®
25 ■