Telephone Functions; Aux In Mode - Silvercrest SKBA 2 A1 Instrucciones De Uso

All manuals and user guides at all-guides.com

Telephone functions

The following telephone functions are only available when the headphones
and the playback device are connected via Bluetooth
phones may not support all functions .
Make a call
♦ Use your smartphone to dial the required telephone number .
The call is automatically transferred to the headphones .
♦ Speak into the device microphone w to make your call .
Accept/reject/end a call
NOTE
► If you are listening to music and receive a call, the playback will be
paused until the call is ended and you will hear the ringtone in the
headphones . After finishing the call, the playback will be resumed
automatically .
► You can accept/reject calls via the headphones or your smartphone .
The sound is automatically played back through the headphones .
► You can switch the audio source at any time via your smartphone .
To do so, please follow the operating manual of your smartphone .
Press 1 x (for incoming call) .
Press and hold for 2 seconds, then release (for
incoming calls)
Press 1x (during call)
Press 2x

AUX IN mode

You can use the supplied audio cable u to connect the headphones
to non-Bluetooth
behave like normal cable-connected headphones and can even be used with
an empty battery . The Bluetooth
on the headphones do not function . Speaker mode can be switched on in
AUX IN mode as long as the battery is sufficiently charged .
♦ Make sure that the headphones are switched off . To switch off the head-
phones, press and hold the
series of beeps and the operating/charging LED 0 goes out .
♦ Connect the audio cable u to the AUX IN q connection socket on the
headphones .
■ 26 │ GB │ IE
button
5
® -capable devices . In AUX IN mode, the headphones
® function is deactivated and the buttons
button 5 until you hear a rising
® . Some smart-
Function
Accept call
Reject call
End call
Redial
SKBA 2 A1