Sun-Flower Setting - Daitsu CDV 57 Manual De Instrucciones

Figure 4.4Function Switchover in Preset Mode and Night Mode
Only the sterilization function is available for set when the water heating is off.
Press the "FUNCTION" button and the sterilization icon will flicker;
Note:
① If the function is shielded or unavailable due to other reasons, its setting will
be skipped when pressing the "FUNCTION" button.
② As for the rapid and automatic water temperature and Sun-flower functions,
the icon of the function will not be displayed if it can not be set in the switched
mode; While a certain function can be set in the switched mode, it can be set,
modified or cancelled in the mode;

4.6 Sun-flower Setting

Sun-flower function: find out the highest outdoor temperature point of the previous
day by recording the outdoor temperature history, so as to determine the time of
power on water heating and save energy;
Set sun-flower function: press the "FUNCTION" button when standard water
heating mode is on to switch to the sun-flower function, and press the
"ENTER/CANCEL" button to enable the Sun-flower function when the icon of "
flickers;
27
Wired Controller CDV 57
"