Daitsu CDV 57 Manual De Instrucciones página 7

No. Displaying name
14 No.
15 Group
16 Set
17 Sub-controller
18 Check
FLOOR interface
19
arrow
20 FLOOR ON/OFF
21 E-heater
22 Defrost
23 Cycle
24 Anti-freeze
25 keep
26 Heat up
27 solar
28 MODE CONFLICT
29 Shield
30 Child lock
31 Timer zone
32 Invalid operation
Note:
When wired controller is connected with different water tanks or hot water generators, some functions
will be different.
When inquiring or setting project number of water tank or hot water
generator, icon "NO." is displayed;
It is displayed when one wired controller controls multiple water tanks
or hot water generators simultaneously;
Display icon "SET" under parameter setting interface
It indicates that the current wired controller is a slave wired controller
(address of wired controller is 02);
Display icon "CHECK" under parameter view interface
The icon will light up when the current wired controller is at the
interface of floor heating function.
The icon for floor heating keeps on; the ON/OFF icon is displayed
according to the on or off status of floor heating.
The icon indicates whether the auxiliary electrical heating is on.
Outdoor unit defrosting status;
Running status of the back water pump.
Anti-freezing status.
Running status of the water tank/hot water generator.
Running status of the water tank/hot water generator.
It is displayed when the hot water generator is connected to solar
energy;Flicker when solar power is on work.
When unit is in cool/dry mode, floor heat is not allowed to turn on.
Mode Conflict will be flickering.
Shielding status.
Child lock status.
Display the system clock and timer status.
Display invalid operation.
3
Wired Controller CDV 57
Instructions